General Features of Pool Dehumidification Unit
Pool dehumidification units are manufactured like conventional air handling unit configurations. The devices are manufactured with a modular structured carcass system. Using galvanized steel box profiles, the cell skeleton are manufactured. The cell panels are double-walled and 1 mm galvanized sheets covered with static paint are used on the outside. Inside, stainless steel or epoxy coated galvanized sheets are used. Basalt and diabase containing rock wool is used as insulation material between the two walls. It provides thermal and acoustic insulation thanks to its intense density.
There is a dehumidification circuit consisting of condenser evaporator compressor and expansion valve on dehumidifying units. Humid air is passed over the cold evaporator, water droplets filtered through the fins collects in the drainage chamber. Dry and cold air is raised one or two degrees above the ambient temperature by passing it over the condenser. Heating if more heat is needed Additional heating is done by means of the coil. Directly driven plug fans are used together with a frequency inverter in the pool dehumidification unit. Pool air handling units automation system is completely It is manufactured as integrated on it. High efficiency scroll compressors are used in the devices.
What Does Pool Dehumidification Unit Do?
When the temperature and humidity come together, the irritating side of the temperature and the intolerable effects of humidity disturb people more clearly. Humidity and temperature, especially in closed areas It causes the decrease of oxygen in the air and the increase of harmful gases. In indoor swimming pools, humid-temperature and pool chemicals create different compounds and make it impossible for us to breathe. Pool type dehumidification units serve to reduce the relative humidity in the air to acceptable and reasonable levels.
In places where other industrial products such as paper and cellulosic materials are stored and where moisture is important, the moisture level is a factor affecting the storage time and determining the processing quality. Stored Package pool stations are used to adjust the moisture balance of the materials.
Preserving valuable documents and historical artifacts stored and exhibited in archives and museums for many years depends on the amount of humidity in the air. High humidity is a factor that accelerates decay. It accelerates corrosion and decay by oxidizing on moisture materials. Pool air handling units eliminate negative effects by keeping the air drier.
Where to Use Pool Dehumidification Unit
Pool dehumidification air handling units are combined devices that limit the amount of humidity between certain values in indoor swimming pools. In addition to its dehumidification function, it also provides heating of the pool area. Thanks to the hot water coil integrated on the device, it provides the heat energy from the hot water generator to be sent to the environment with the help of fans. Water molecules suspended in the air are cold When it touches the surface of the evaporator in the case, it reaches the dew point quickly and becomes a droplet, moves down along the serpentine fins and collects in the drainage chamber. This work is constantly As it is repeated, the air becomes free from moisture. In addition, the hydrochloric acid in the air is separated. Pool dehumidification units, which operate according to the temperature difference of the indoor and outdoor environment, make the outdoor environment more efficient than the indoor environment. In cases where it is hot, it ensures that the humid air is expelled directly and the drier outside air is transferred to the indoor environment and the humidity rate is balanced. Compressors are disabled while doing this less energy is used. Dampers on the device adjust the amount of fresh air and exhaust according to the difference between indoor and outdoor temperatures.
Advantageous Aspects of the Pool Dehumidification Unit Compared to Other Systems
Air handling units are used in old-style pool ventilation systems. Since there is no dehumidification process in air handling units, The air is completely discharged and fresh air is supplied from outside instead. It brings serious energy costs in the transition months and winter months when the outdoor environment is colder. The colder outdoor air must be heated and sent inside. Due to the dehumidification circuit operating scenario within the pool dehumidification units, air from the outside environment in colder times It preserves the current heat by working with the internal air cycle without allowing the passage.
